LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1990 >> Range Rover County >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Air Suspension - 3.9L & 4.2L >> Removal & Installation >> Electronic Control Unit (Ecu) >> Removal

Electronic Control Unit (Ecu): Removal

  1. Remove front trim from right hand front seat base.
  2. Adjust seat backward and forward.
  3. Disconnect negative battery cable.
  4. Release retaining clip from upper ECU plug.
  5. Move plug in direction of arrow. See Fig 1 .
  6. Detach hooked end of plug from retaining post.
  7. Remove retaining screw.
  8. Remove ECU from retaining clip.
Fig 1: Removing Electronic Control Unit (ECU)
G00089025Courtesy of LAND ROVER NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals