LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1990 >> Range Rover County >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Air Suspension - 3.9L & 4.2L >> Removal & Installation >> Air Reservoir >> Installation

Air Reservoir: Installation

  1. Install reservoir and tighten bolts to 24 N.m (18 ft. lbs.).
  2. Connect air pipe and attach rubber boot.
  3. Connect pressure switch multi-plug.
  4. Tighten drain plug to 70 N.m (52 ft. lbs.).
  5. Start engine to repressurize system.
  6. Leak test reservoir. Refer to LEAK TEST PROCEDURE  under TROUBLE SHOOTING.
scientia non olet · About LEMON Manuals