Air Pipe: Removal
WARNING:
Air suspension is pressurized up to 10 bar. Dirt or grease must not enter system. Wear hand, ear and eye safety standard protection when servicing system.
CAUTION:
Air pipes may be damaged if not disconnected correctly, resulting in possible leaks.
- Depressurize complete system. Refer to DEPRESSURIZING & PRESSURIZING SYSTEM under SERVICING.
- Clean air pipes connection with stiff brush and soapy water. Peel back rubber boot.
- To disconnect air pipes, apply equal downward pressure on collet at "A" as shown. See Fig 1 .
- Pull air pipe firmly out through center of collet.
- Inspect disconnected end of air pipe for damage and scores. Rectify as necessary.