LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 1990 >> Range Rover County >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Electronic Air Suspension - 3.9L & 4.2L >> Removal & Installation >> Air Harness >> Removal

Air Harness: Removal

CAUTION: Thoroughly clean around all connections before disconnecting air pipes. Seal all exposed components from dirt and moisture entering system.
  1. Place vehicle on a wheel free lift.
  2. Remove wheels.
  3. Remove air supply unit. See AIR SUPPLY UNIT  .
  4. Disconnect air pipe from front left air spring.
  5. Release front left chassis cable ties and clips.
  6. Disconnect air pipe from reservoir.
  7. Release back left chassis cable ties and clips, leave clips in chassis.
  8. Disconnect air pipe from back left air spring.
  9. Release 3 rear chassis cable ties.
  10. Disconnect air pipe from back right air spring.
  11. Release back right chassis cable ties and clips.
  12. Disconnect air pipe from front right air spring.
  13. Release front right chassis cable ties and clips.
  14. Remove air harness from vehicle.
scientia non olet · About LEMON Manuals