High Profile

NOTE: When raising ride height, rear of vehicle will raise by 70% of movement first followed by 70% of front. Rear will raise remaining 30% before front. Lowering will be achieved by lowering front of vehicle first. This will ensure that, with headlight illuminated, there is no inconvenience from headlight dazzle to other road users. BUT, lowering to access position will be achieved by fastest possible means, by opening all air valves at the same time.

This position is used to improve approach and departure angles and when wading. Pressing RAISE switch will select this position provided road speed is below 35 mph (56 kph) with INHIBIT off. The vehicle will return to standard position when road speed exceeds 35 mph (56 kph) or LOWER switch is pressed. The RAISE lamp is illuminated in this condition.