DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Check the CAN communication	Poor connection CAN communication circuit (open, short) CAN high line open CAN low line open CAN high and low line open CAN high line short to battery CAN low line short to battery CAN high, low line short to each other CAN high, low line short to each other and short to ground Terminating resistance fault Transmitting controller bus off Transmitting controller disconnected Transmitting controller power, fuse or ground fault Transmitting controller H/W, S/W fault CAN line noise ICU fault (CAN module fault)
Enable Conditions		Ignition "ON" Normal battery voltage 9 to 16V
Threshold value		C-CAN "High" line error C-CAN "Low" line error
DTC Erasing	Active	DTC is erased after solved problem
DTC Erasing	History	DTC is erased when is not the problem during Ignition ON/OFF 30 times