LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2025 >> Seltos X-Line >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Intake And Exhaust System - 1.6L >> Intake Manifold >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install in reverse order of removal.
NOTE: When installing, pre-tighten the bolts and nuts in the order shown in the figure and then fully tighten them to the specified torque.
Fig 1: Intake Manifold Bolts And Nuts Tightening Sequence
G16423239Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals