Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (HUD ↔ Chassis ground) |
|
HUD connector | 3 (ON/START power) | Chassis ground | - | B+ |
| HUD connector | 2 (Memory power) | Chassis ground | - | B+ | ||
| Open in circuit inspection (HUD ↔ Chassis ground) |
|
HUD connector | 11, 12 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "M-CAN INSPECTION " procedure.
No Good
- Repair as necessary and go to "VERIFICATION OF REPAIR " procedure.