LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Hydraulic System >> Electronic Oil Pump (EOP) >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • The existing O-rings (A, B) must be replaced with a new one (do not reuse).
      G15693669Courtesy of KIA MOTORS AMERICA, INC.
      G15693670Courtesy of KIA MOTORS AMERICA, INC.
    • Check for leakage of coolant or fluid from hose connection while the engine is starting and running.
  2. Check the ATF level after refilling the automatic transaxle with fluid.

    (Refer to Hydraulic System - "FLUID ")

scientia non olet · About LEMON Manuals