LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC U0001-00: High Speed CAN Communication Bus >> Wiring Inspection >> Circuit Inspection >> Inspection Item: Module Circuit Inspection

Inspection Item: Module Circuit Inspection

Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Disconnect the electrical connector(s) from the concerned component.
  2. Ignition "ON".
TCM connector 67, 68 (Memory power) Chassis ground - B+
  1. Disconnect the electrical connector(s) from the concerned component.
  2. Ignition "ON".
TCM connector 17 (ON/START Input) Chassis ground - B+
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
TCM connector 71, 73, 74 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good