| DTC Strategy |
|
- Faulty solenoid valves
- Faulty mechanical parts
|
| Enable Condition |
- 1s after the last shift was finished
- ATF temperature higher than -10°C (14°F)
- Lever position in "D" or "Sports" (forward gear)
- Battery voltage is more than 10V
- Output speed higher than 150 RPM (1st)
- Output speed higher than 200 RPM (2nd to 8th)
- Input speed is higher than 0 RPM
|
| Threshold Value |
- 5th gear synchronization error (absolute value of input speed - (output speed * gear ratio) is higher than 200 RPM)
|
| Fail Safe |
|
| Detecting Time |
|
| MIL ON Condition |
|