LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Steering >> Electronic Steering >> Motor Driven Power Steering System Diagnosis >> DTC C1814-83: CAN Message Failure - SAS >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • CAN message monitoring
  • Poor connection
  • Connector disconnected
  • Open or short in the circuit
  • SAS
Enable Conditions
  • Ignition "ON"
Threshold Value
  • Abnormal SAS CAN message
  • SAS is misaligned over 50 degree
Fail Safe
  • Keep assist (some performance logic is not operated)
Restoration Conditions
  • Normal condition after ignition "OFF" and ignition "ON"
scientia non olet · About LEMON Manuals