LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Steering >> Electronic Steering >> Motor Driven Power Steering System Diagnosis >> DTC C1704-01: ECU Fail-Safe Relay Fail >> Wiring Inspection >> Circuit Inspection >> Charging System Inspection

Charging System Inspection

Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Shift lever position "P".
  2. Ignition "ON".
  3. Start the engine and turn the headlight, rear window defogger and all other electrical devices.
  4. Measure voltage between (+) terminal and (-) terminal of battery while maintaining engine RPM at 2500 RPM.
 Battery (+) Terminal Battery (-) Terminal 9 to 16V
scientia non olet · About LEMON Manuals