LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag System Diagnosis (4 Of 4) >> DTC B2618-00: Cluster Airbag Warning Lamp CAN Message Time-Out By CAN Bus >> Wiring Inspection >> Circuit Inspection >> Module circuit inspection

Module circuit inspection

Inspection Item Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
Power inspection (CLU ↔ Chassis ground)
  1. Ignition "ON".
  2. Disconnect CLU connector.
CLU connector 39, 40 (ON/START Input) Chassis ground - B+
Open in circuit inspection (CLU ↔ Chassis ground)
  1. Ignition "OFF".
  2. Disconnect CLU connector.
CLU connector 1, 37 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good