LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Side Airbag (SAB) Module >> Removal & Installation >> Removal >> [Second Row]

[Second Row]

  1. Disconnect the battery negative (-) terminal.
    NOTE: After disconnecting the battery negative (-) terminal, wait at least 3 minutes and 30 seconds.
  2. Remove the rear seat back cover.

    (Refer to Body - "REAR SEAT BACK COVER ")

  3. Remove the second row side airbag (A) after removing the nuts.

    Tightening torque: 

    6.9 - 9.8 N.m (0.7 - 1.0 kgf.m, 5.1 - 7.2 lb.ft)

G00639616Courtesy of KIA MOTORS AMERICA, INC.