LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Side Airbag (SAB) Module >> Removal & Installation >> Installation

Removal & Installation: Installation

  1. Install in the reverse order of removal.
  2. After installing the airbag module, check if the airbag system operates normally.
    NOTE: When IG is ON, the SRS indicator light should turn off after turning on for about 6 seconds.