LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Knee Airbag (KAB) Module >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Disconnect the battery negative (-) terminal.
    NOTE: After disconnecting the battery negative (-) terminal, wait at least 3 minutes and 30 seconds.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD PANEL ")

  3. Remove the knee airbag (A) after removing the nuts.

    Tightening torque: 

    5.9 - 7.8 N.m (0.6 - 0.8 kgf.m, 4.3 - 5.8 lb.ft, 52.1 - 69.4 lb.in)

    G15709282Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the knee airbag connector (A).
G15709283Courtesy of KIA MOTORS AMERICA, INC.