Removal & Installation: Installation
- Install in the reverse order of removal.NOTE:
- Use the color of sentence and line on a module to identify curtain airbag.
- Left side: Yellow label (attached to plastic cover)
- Right side: Orange label (attached to plastic cover)
- Be careful not to twist when the curtain airbag module installing. The curtain airbag module may not deploy normally if twisted.
- Use the color of sentence and line on a module to identify curtain airbag.
- After installing the airbag module, check if the airbag system operates normally.NOTE: When IG is ON, the SRS indicator light should turn off after turning on for about 6 seconds.