LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Airbag Modules And Clock Spring >> Clock Spring >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Disconnect the battery negative (-) terminal.
    NOTE: After disconnecting the battery negative (-) terminal, wait at least 3 minutes and 30 seconds.
  2. Remove the steering wheel.

    (Refer to Steering System - "STEERING WHEEL ")

  3. Remove the steering column shroud lower panel.

    (Refer to Body - "STEERING COLUMN SHROUD PANEL ")

  4. Disconnect the clock spring connectors (A).
    G15709273Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the clock spring (A) by releasing the fixing hook.
G15709274Courtesy of KIA MOTORS AMERICA, INC.