Refrigerant charge
- Replenish the amount of discharged compressor oil by using R-1234yf recovery/recycling/charging equipment while the high pressure valve is opened after evacuating the air conditioner system.NOTE: If additional oil is not added when charging the refrigerant, the lubricity deteriorates due to insufficient oil in the system, which cause problem such as compressor sticking.
- Charge the refrigerant with specified amount while the high-pressure valve open by using the R-1234yf recovery/recycling/charging equipment and then close the high-pressure valve.
Regulated refrigerant amount: 950 ± 25 (33.51 ± 0.88)
NOTE: Do not overcharge the refrigerant as there is a risk of damage to the compressor. - Check that the refrigerant is not leaking from the system with leak detector. (Refer to REFRIGERANT LEAK TEST )