LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning System Diagnosis >> DTC B16A4-13: ECV Fault >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

G15713920Courtesy of KIA MOTORS AMERICA, INC.
G15713921Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
  3. Ignition "ON".
ECV connector 3 (+) Chassis ground - Approx. 3.8V
ECV connector 2 (-) Chassis ground - Approx. 3.8V
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component and A/C control module.
ECV connector 3 (+) Chassis ground - ∞ (infinity)Ω
ECV connector 2 (-) Chassis ground - ∞ (infinity)Ω
ECV connector 3 (+) A/C control module (auto) connector 37 (+) Approx. below 1Ω
ECV connector 3 (+) A/C control module (manual) connector 36 (+) Approx. below 1Ω
ECV connector 2 (-) A/C control module (auto) connector 38 (-) Approx. below 1Ω
ECV connector 2 (-) A/C control module (manual) connector 37 (-) Approx. below 1Ω

Good 

No Good