DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage monitoring	Wiring contact failure Signal circuit open or short to the ground Faulty occupant rear temperature actuator Faulty A/C control module
Enable Condition	Ignition "ON"
Threshold Value	Feedback signal is lower than 0.1V for more than 1s
Fail Safe	Occupant rear set temperature is low 22°C (72°F): Actuator is positioned at cool mode Occupant rear set temperature is higher than 22.5°C (73°F): Actuator is positioned at warm mode