LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System Diagnosis (13 Of 13) >> DTC P2B95-00: Cold Start Injection Pulse Performance >> Wiring Inspection >> Circuit Inspection >> Injector#1 Inspection

Injector#1 Inspection

Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Disconnect the electrical connector(s) from the concerned component and ECM.
  2. Ignition "ON".
 Injector #1 connector 1 (high) Chassis ground - Approx. 0V
Injector #1 connector 2 (low) Chassis ground - Approx. 0V
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component and ECM.
 Injector #1 connector 1 (high) Chassis ground - ∞ (infinity)Ω
Injector #1 connector 2 (low) Chassis ground - ∞ (infinity)Ω
Injector #1 connector 1 (high) Injector #1 connector 2 (low) ∞ (infinity)Ω
scientia non olet · About LEMON Manuals