DTC Information: DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Monitor the current of fuel pump	Poor connection Open or short in three phase control circuit Blockage of fuel filter Blockage of fuel line Fuel pump Fuel Pump Control Module (FPCM)
Enable Condition		Target fuel pressure is higher than 250 kPa and lower than 600 kPa Engine running condition Battery voltage is higher than 10V
Threshold Value	Case 1	The current of fuel pump is lower than 0.2A
Threshold Value	2	The current of fuel pump is higher than 11A
Diagnostic Time	Case 1	0.2s
Diagnostic Time	Case 2	2s
MIL ON Condition		MIL OFF (only DTC)