| Case 1 |
DTC Strategy |
- TPS adaptation condition check
|
- Throttle stuck
- Open in motor circuit
- Faulty motor
- Faulty ECM
|
| Enable Condition |
|
| Threshold Value |
- TPS adaptation is requested, but not possible
|
| Case 2 |
DTC Strategy |
- ETC limp home position check
|
| Enable Condition |
|
| Threshold Value |
- Difference between throttle sensor voltage in limp home and limp home set point is greater than 0.332V
|
| Case 3 |
DTC Strategy |
- Lower mechanical stop adaptation voltage range check
|
| Enable Condition |
|
| Threshold Value |
- Difference between throttle sensor voltage in lower mechanical stop position and lower mechanical stop set point position is greater than 0.322V
|
| Diagnostic Time |
|
| MIL ON Condition |
|