Circuit Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Starter relay connector | 1 (relay power) | Chassis ground | - | B+ |
| Starter relay connector | 3 (coil power) | Chassis ground | - | Approx. 0V | |
| Starter relay connector | 5 (coil control) | Chassis ground | - | Approx. 2.5V | |
| Starter relay connector | 2 (starter power) | Chassis ground | - | Approx. 0V | |
|
Starter relay connector | 2 (starter power) | Starter motor connector | 1 (power) | Approx. below 1Ω |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair or replace as necessary and then, Go to "VERIFICATION OF REPAIR " procedure.