| DTC Strategy |
|
- Poor connection
- Short in harness
- electrical noise
- Target wheel damage
- CMPS - Ex (Bank1)
- ECM
|
| Case 1 |
Enable Condition |
- Engine speed is between 96 RPM and 3008 RPM
|
| Threshold Value |
- Camshaft segment duration is too short.
- Two camshaft edges within segment duration is lower than 50us
|
| Diagnostic Time |
|
| Case 2 |
Enable Condition |
- Engine speed is greater than 288 RPM
|
| Threshold Value |
- Camshaft segment duration gradient is lower than 0.25 or theoretical segment period is greater than 4
|
| Diagnostic Time |
|
| MIL ON Condition |
|