LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System Diagnosis (08 Of 13) >> DTC P0345-00: Camshaft Position Sensor 'A (Intake)' Circuit (Bank 2) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
Case 1 DTC Strategy
  • Missing signal
  • Poor connection
  • Open in harness
  • CMPS - In (Bank2)
  • ECM
Enable Condition
  • First crankshaft long teeth is passed
Threshold Value
  • No camshaft edge is detected within ten revolutions
Diagnostic Time
  • 2 revolutions
Case 2 DTC Strategy
  • Out of range
Enable Condition
  • First crankshaft long teeth is passed
Threshold Value
  • Camshaft edge is out of range for more than 6 revolutions
Diagnostic Time
  • 6 revolutions
MIL ON Condition
  • 2 driving cycles
scientia non olet · About LEMON Manuals