DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitor the fuel pressure sensor's signal	Poor connection Blockage of fuel lines Over pressure relief valve stuck close Fuel pressure sensor Fuel Pump Control Module (FPCM)
Enable Condition	Target fuel pressure is higher than 250 kPa and lower than 600 kPa Engine running Battery voltage is higher than 10V
Threshold Value	Fuel pressure sensor output voltage is higher 3.3V and lower than 4.25V (It means that fuel pressure is higher than 800 kPa)
Diagnostic Time	10s
MIL ON Condition	MIL OFF (only DTC)