| DTC Strategy |
- Deviation check between actual CAM position and CAM setpoint position in case of changing setpoint (slow response of actuator)
|
- Poor connector connection
- Faulty cam phaser
- Faulty intake E-CVVT assembly
|
| Enable Condition |
- Camshaft set-point movement more than 8° within in less than 1s
- Camshaft set-point moved more than 0 times since engine start
- Engine speed at between 450 RPM and 5000 RPM
- Engine oil temperature at between 68°F (20°C) and 248°F (120°C)
- Battery voltage at between 11V and 16V
|
| Threshold Value |
- CAM position movement less than 2.67° within 1s.
|
| Diagnostic Time |
|
| MIL ON Condition |
|