LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Intake And Exhaust System >> Exhaust Manifold And Catalytic Converter >> Removal & Installation >> Installation >> LH Exhaust Manifold

LH Exhaust Manifold

  1. Install in the reverse order of removal.
    NOTE: When installing, pre-tighten the nuts in the order shown in the figure and then fully tighten them to the specified torque.
Fig 1: LH Exhaust Manifold Nuts Tightening Sequence
G15692979Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals