Cylinder Head: Removal: Notes
NOTE:
- Use fender covers to avoid damaging painted surfaces.
- To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature (20°C [68°F]) before removing it.
- When handling a metal gasket, be careful not to fold the gasket or damage the contacting surface of the gasket.
- To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
Information
- Mark all wiring and hoses to avoid wrong connection.
- Turn the crankshaft pulley so that the No. 1 piston is at top dead center.