LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head Assembly >> Cylinder Head >> Inspection >> MLA

Cylinder Head: Inspection: MLA

  1. Inspect MLAs.

    Using a micrometer, measure the MLA outer diameter.

    MLA O.D. 

    Intake/Exhaust:

    34.964 - 34.980 mm (1.3765 - 1.3771 in.)

  2. Using a caliper gauge, measure MLA tappet bore inner diameter of cylinder head.

    Tappet bore I.D.

    Intake/Exhaust:

    35.000 - 35.025 mm (1.3779 - 1.3789 in.)

  3. Subtract MLA outer diameter measurement from tappet bore inner diameter measurement.

    MLA to tappet bore clearance 

    [Standard]

    Intake/Exhaust: 0.020 - 0.061 mm (0.0008 - 0.0024 in.)

scientia non olet · About LEMON Manuals