[Upper Oil Pan]

Install the upper oil pan.

Using a gasket scraper, remove all the old packing material from the gasket surfaces.

Before assembling the oil pan, apply liquid sealant TB 1217H on the oil pan. Assemble the part within 5 minutes of applying sealant.

Bead width:

2.5 mm (0.1 in.)

Courtesy of KIA MOTORS AMERICA, INC.

NOTE:

Clean the sealing face before assembling two parts.
Remove harmful foreign materials on the sealing face before applying sealant
When applying sealant gasket, sealant must not protrude into the oil pan.
To prevent leakage of oil, apply sealant gasket to the inner threads of the bolt holes.

Install the remaining parts in the reverse order of removal.
NOTE: Install the oil pan to the specified torque.