LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Reservoir Tank >> Removal & Installation >> Removal

Removal & Installation: Removal

  1. Remove the reservoir tank
  1. Separate the over flow hose (B).
  2. Remove the reservoir tank (A) after removing the bolts.

    Tightening torque: 

    7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

G15692678Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals