| DTC Strategy |
- Monitoring the motor rotation time and operating current
|
- Rear brake pad is excessive wear
- Rear brake pad is over heated
- Vehicle carries over-weight (over GVW)
- The slope of surface is over 30% hill
|
| Enable Condition |
- Normal 12V battery voltage (9 to 16V)
- Vehicle speed greater than 0.5 km/h (0.31 MPH)
|
| Threshold Value |
- When the EPB is engaged condition, if the wheel speed or wheel pulse occurs more than a certain time and the re-clamp operates more than 3 times
|
| Detecting Time |
|
| Warning Lamp |
|
| Disable Condition |
- After ignition off/on or completing released
|