DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Variant coding monitoring	Variant coding is not performed correctly Faulty HECU
Enable Condition	Normal 12V battery voltage (9 to 16V) Engine "ON"
Threshold Value	Inline coding or variant coding is not completed Variant coding is un-matched When message not received from EMS due to CAN bus off or CAN time out for more than 5s AWD message is received even if the vehicle is not AWD
Warning Lamp	EBD, ABS, ESC, AVH
Disable Condition	When variant coding is completed