Module Circuit Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (ECM ↔ Chassis ground) |
|
ECM connector | 75 (Memory power) | Chassis ground | - | B+ |
| Power inspection (ECM ↔ Chassis ground) |
|
ECM connector | 41 (ON/START Input) | Chassis ground | - | B+ |
| Open in circuit inspection (ECM ↔ Chassis ground) |
|
ECM connector | 1, 2, 4 (ground) | Chassis ground | - | Approx. below 1Ω. |
Good
- Go to "P-CAN INSPECTION " procedure.
No Good
- Repair as necessary and then Go to "VERIFICATION OF REPAIR " procedure.