LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs/ESC Diagnosis (2 Of 4) >> DTC C1643-08: CAN Time-Out Yaw Rate & G Sensor >> Wiring Inspection >> Circuit Inspection >> Module Circuit Inspection

Module Circuit Inspection

Inspection Item Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
Power inspection (SRSCM ↔ Chassis ground)
  1. Disconnect the connector(s) from SRSCM.
  2. Ignition "ON".
SRSCM connector 10 (Memory power) Chassis ground - B+
SRSCM connector 28 (ON/START Input) Chassis ground - B+
Open in circuit inspection (SRSCM ↔ Chassis ground)
  1. Ignition "OFF".
  2. Disconnect the connector(s) from SRSCM.
SRSCM connector 40 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good