| DTC Strategy |
|
- Poor connector connection
- Faulty BLS circuit
- Faulty BLS
- Faulty master cylinder
|
| Enable Condition |
Case1 |
- Normal 12V battery voltage (9 to 16V)
- ABS, TCS, ESC and HAC are not controlled
- Pressure of master cylinder is greater than 15 bar
|
| Case2 |
- Normal 12V battery voltage (9 to 16V)
- ABS, TCS, ESC and HAC are not controlled
- Pressure of master cylinder is greater than 15 bar
- Vehicle speed is more than 20kph (12.4 mph)
|
| Threshold Value |
Case1 |
- BLS "OFF" for more than 3s (or 1s x 3 times)
|
| Case2 |
- BLS "OFF" for more than 360s (or 120s x 3 times)
|
| Warning Lamp |
|
| Disable Condition |
- When the ignition switch turns off and then on
- BLS "OFF" and pressure sensor < 7 bar for 1s
- BLS "ON" and pressure sensor > 15 bar for 1 s
|