LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs/ESC Diagnosis (1 Of 4) >> DTC C1261-04: Steering Angle Sensor Is Not Calibrated >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • Calibration monitoring
  • Poor connector connection
  • SAS calibration is not performed correctly
  • Faulty MDPS
Enable Condition
  • Normal 12V battery voltage (9 to 16V)
Threshold Value
  • If the zero value calibration for steering angle sensor is not done
Warning Lamp
  • ESC
Disable Condition
  • After the ignition switch turns off and then on When calibration is complete
scientia non olet · About LEMON Manuals