Module Circuit Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (MDPS ↔ Chassis ground) |
|
MDPS connector | 1 (Memory power) | Chassis ground | - | B+ |
| Power inspection (MDPS ↔ Chassis ground) |
|
MDPS connector | 1 (ON/START Input) | Chassis ground | - | B+ |
| Open in circuit inspection (MDPS ↔ Chassis ground) |
|
MDPS connector | 2 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "C-CAN INSPECTION " procedure.
No Good
- Repair open or short in circuit and then Go to "VERIFICATION OF REPAIR " procedure.