LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System >> Brake Line >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install in the reverse order of removal.
    NOTE: Use a new washers (A) whenever installing.
    G15709362Courtesy of KIA MOTORS AMERICA, INC.
  2. After installation, bleed the brake system.

    (Refer to Brake system - "BRAKE BLEEDING PROCEDURES ")

  3. Check the spilled brake oil.
scientia non olet · About LEMON Manuals