LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Tailgate >> Tailgate Latch >> Removal & Installation >> Removal >> Power Tailgate Latch

Power Tailgate Latch

  1. Remove the tailgate lid lower trim.

    (Refer to Tailgate - "TAILGATE LID TRIM ")

  2. Remove the power tailgate latch (B) by removing the bolts after disconnecting the power tailgate latch connector (A).

    Tightening torque: 

    21.6 - 26.5 N.m (2.2 - 2.7 kgf.m, 15.93 - 19.50 lb.ft)

    G15709530Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the power tailgate actuator connector (A).
    G00639604Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the power tailgate actuator (A) after removing the nuts.

    Tightening torque: 

    21.6 - 26.5 N.m (2.2 - 2.7 kgf.m, 15.93 - 19.50 lb.ft)

G00639605Courtesy of KIA MOTORS AMERICA, INC.