DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Check CAN communication	Poor connector connection CAN communication circuit (open, short) CAN high line open CAN low line open CAN high and low line open CAN high line short to 12V battery CAN low line short to 12V battery CAN high, low line short to each other CAN high, low line short to each other and short to ground Terminating resistance fault Transmitting controller bus off Transmitting controller disconnected Transmitting controller power, fuse or ground fault Transmitting controller H/W, S/W fault CAN line noise ICU faulty (CAN module faulty)
Enable Conditions	Normal 12V battery voltage
Threshold Value	CAN high, low communication line simultaneous power short or ground
Diagnosis Time	2s
Erase Condition	CAN communications return to normal state