DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Check Output signal	Overheat Faulty the module (Slave) Over 85°C (185°F) Open circuit Short circuit Cutting LED wires Disconnect connectors
Enable Condition	Ignition "ON" Battery voltage 9 to 16V No DTC P0A78
Threshold Value	Faulty module (Salve) (Overheat) Open in module (Slave) LED circuit Short in module (Slave) LED circuit
Diagnosis Time	Mood Lamp "ON" and wait 3s ex) Starting and open doors
Symptom	Mood Lamp "OFF"
Fail Safe	Mood lamp LED "OFF"
Erasing Condition	Erase the DTC and re-setting color and light