Component Inspection
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Subwoofer speaker2 (component side) | 3 (+) | Subwoofer speaker2 (component side) | 4 (-) | Approx. 2.1Ω (20°C/68°F) |
Good
- If no problems were found with the circuits or connectors, replace the AMP and go to "VERIFICATION OF REPAIR " procedure.
No Good
- If no problems were found with the circuits or connectors, replace the subwoofer speaker and go to "VERIFICATION OF REPAIR " procedure.