Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (ICU ↔ Chassis ground) |
|
ICU connector | 1, 2, 3, 4, 17 (hot at all power) | Chassis ground | - | B+ |
| ICU connector | 26, 31, 40 (ACC, IG1, IG2 power) | Chassis ground | - | B+ | ||
| Open in circuit inspection (ICU ↔ Chassis ground) |
|
ICU connector | 16, 24 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "OPEN IN CAN COMMUNICATION LINE INSPECTION " procedure.
No Good
- Repair open or short in circuit and then go to "VERIFICATION OF REPAIR " procedure.