DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Power status	Poor connector connection Faulty SVM power supply Faulty the SVM
Enable Condition	Ignition "ON" Normal 12V battery voltage (9 to 16V)
Threshold Value	Communicate every 10 ms Reset if the ADAS_PRK is not respond for 200 times Record the DTC, when the reset-count is 4 times
Diagnosis Time	Immediately
Disable Condition	Ignition "ON" and "OFF" 30 times Clear the DTC
Fail Safe	Reset DSP