LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2024 >> Telluride SX X-Line >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> ADAS Driving Ecu Diagnosis >> DTC C1880-87: CAN Time-Out FR_C_RDR >> Wiring Inspection >> Circuit Inspection >> Module Inspection

Module Inspection

Inspection Item Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
Power inspection (Front corner radar LH ↔ Chassis ground)
  1. Disconnect the front corner radar LH connector.
  2. Ignition "ON".
Front corner radar LH connector 1 (hot at all power) Chassis ground - B+
Front corner radar LH connector 10 (ON/START Input) Chassis ground - B+
Power inspection (Front corner radar RH ↔ Chassis ground)
  1. Disconnect the front corner radar RH connector.
  2. Ignition "ON".
Front corner radar RH connector 1 (hot at all power) Chassis ground - B+
Front corner radar RH connector 10 (ON/START Input) Chassis ground - B+
Open in circuit Inspection (Front corner radar LH ↔ Chassis ground)
  1. Ignition "OFF".
  2. Disconnect the front corner radar LH connector.
Front corner radar LH connector 4 (ground) Chassis ground - Approx. below 1Ω
Open in circuit Inspection (Front corner radar RH ↔ Chassis ground)
  1. Ignition "OFF".
  2. Disconnect the front corner radar RH connector.
Front corner radar RH connector 4 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good